Tile and Grout Cleaning

Tile and Grout Cleaning

Regrouting and Silicone Replacement

Raking out and replacing cracked, crumbling or badly stained grout, and stripping and renewing mouldy silicone around baths, showers and sinks.

Free Tile and Grout Cleaning quote

No obligation. We only use your details to reply about this job.

Regrouting and Silicone Replacement — Tile and Grout Cleaning

What's involved

Some grout is beyond cleaning: cracked, crumbling, missing in places or permanently stained deep inside. In showers, failed grout lets water reach the wall behind the tiles, which can cause damage over time. The specialist rakes out the old grout to a consistent depth using a grout saw or oscillating tool, taking care not to chip tile edges. Joints are vacuumed and wiped clean, then new grout is pressed in with a rubber float, using a flexible, water-resistant grout in wet areas. The surface is cleaned and buffed before the grout fully cures. Old silicone is cut out, residue removed with a silicone remover, the joint cleaned with solvent and left dry, then a fresh bead of mould-resistant sanitary silicone is applied and tooled smooth. Showers should not be used for 24 hours after regrouting and silicone work. A standard shower enclosure takes around half a day.

How we handle it

  1. Tell us about your tiles

    Use the quote form to tell us the type of tile, where it is, roughly how many square metres, and what the problem is, such as dirty grout, limescale or worn stone. Clear photos of the worst areas help us quote accurately.

  2. Receive a clear price

    We send a fixed price for cleaning and any sealing, colour sealing, regrouting or stone restoration. If the tile type is unclear, the specialist may test a small area first.

  3. Prepare the room

    Move furniture, rugs and loose items off the floor and out of the shower. Make sure there is water and power nearby and parking close by for the machine and equipment.

  4. Cleaning and treatment

    The specialist cleans with products matched to the tile, scrubs grout lines by machine or hand and extracts the dirty solution. Sealing or regrouting follows once surfaces are fully dry.

  5. Aftercare advice

    You get a walk-through of the finished surface and advice on drying times, how long to wait before mopping or showering, and which cleaning products to use so the sealer lasts.

Price guide

Tile and grout cleaning is usually priced per square metre for floors and per enclosure for showers, depending on the tile type, how dirty the grout is and whether sealing or colour sealing is added. Natural stone and Victorian tiles take more time and care. A minimum charge often applies to small jobs. We give a fixed price after seeing photos.

  • Ceramic or porcelain floor deep clean: £4–£8 per m². Machine clean, grout scrub and extraction; minimum charge usually around £120.
  • Victorian hallway tile restoration: from £350. Stripping old coatings, deep cleaning and breathable sealing of a typical hallway.
  • Natural stone clean and seal: £10–£25 per m². Stone-safe cleaning, honing where needed and impregnating sealer.

Questions about regrouting and silicone replacement

Can mouldy silicone be cleaned?

Surface mould on silicone can sometimes be removed with a mould remover, but once black mould has grown into the silicone, it cannot be fully cleaned out. The only lasting fix is to cut out the old silicone, clean and dry the joint, and apply fresh mould-resistant sanitary silicone.

Get a free tile and grout cleaning quote

Tell us what you need and we'll come back with a clear price.

Request a quote