Tile and Grout Cleaning glossary
The terms you'll come across, explained in plain English.
- Alkaline cleaner
- A cleaner with a high pH that breaks down grease, oils and organic soil. Commonly used on ceramic and porcelain tiles and in stone-safe formulations.
- Dwell time
- The time a cleaning product is left on a surface before scrubbing or rinsing, allowing it to break down grease and soil.
- Efflorescence
- White, powdery salt crystals left on tiles, stone or masonry when moisture carrying dissolved salts rises and evaporates at the surface.
- Encaustic tile
- A tile whose pattern is formed from different coloured clays inlaid into the body of the tile, rather than printed or glazed on the surface. Common in Victorian floors.
- Epoxy grout
- A grout made from resins and a hardener rather than cement. It is non-porous and highly stain-resistant, so it does not normally need sealing.
- Etching
- Dull marks or rings on calcium-based stone such as limestone, marble and travertine, caused by a chemical reaction with acids like vinegar or juice.
- Grout
- The material filling the joints between tiles. Standard cement-based grout is porous and absorbs dirt, grease and liquids, which is why it darkens over time.
- Grout colour sealant
- A coloured coating applied to clean grout lines that covers staining, gives every joint a uniform shade and adds strong stain resistance.
- Honing
- Grinding a thin layer from a stone surface with diamond pads of increasing fineness to remove scratches, etching and wear, leaving an even finish.
- Hot water extraction
- Spraying hot water and cleaning solution onto a surface, then removing it immediately with strong suction, taking dissolved soil away with it.
- Impregnating sealer
- A sealer that soaks into grout or stone and lines the pores below the surface, repelling water and oil without forming a visible film.
- pH-neutral cleaner
- A cleaner that is neither acidic nor alkaline, safe for routine cleaning of natural stone and sealed surfaces without etching or stripping sealers.
- Quarry tile
- A dense, unglazed clay floor tile, usually red, black or buff, traditionally used in kitchens, sculleries, hallways and farmhouse floors.
- Regrouting
- Raking out old, cracked or crumbling grout from tile joints and replacing it with fresh grout, usually when cleaning alone cannot restore it.
- Rotary machine
- A floor machine with a spinning brush or pad used to scrub tiles, strip coatings or hone stone, far more effective than hand scrubbing on larger areas.
Get a free tile and grout cleaning quote
Tell us what you need and we'll come back with a clear price.
Request a quote