Tile and Grout Cleaning

Nationwide · England, Scotland & Wales

Tile and Grout Cleaning across the UK

Grubby grout and dull tiles brought back to life.

In short

Tile and Grout Cleaning is the specialist deep cleaning of ceramic, porcelain, natural stone and period tiled surfaces and the grout lines between them. It uses rotary machines, matched chemicals and hot water extraction to remove embedded dirt, grease, limescale and mould, followed by sealing or colour-sealing grout so it stays clean for longer.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Tile and Grout Cleaning quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

Grout is porous. Every time a floor is mopped, dirty water sinks into the joints, and over months they turn from pale grey to dark brown. In showers, soap scum and limescale build up on the tile surface while mould grows in the grout and silicone. Ordinary mopping and spray cleaners cannot reach the dirt locked into the grout's pores. Tile and Grout Cleaning arranges specialists who use rotary scrubbers, chemicals matched to the tile and hot water extraction to pull it out.

We clean kitchen and hallway floors, bathrooms and showers, conservatory and patio tiles, natural stone such as limestone, travertine and slate, and original Victorian geometric and quarry tiles. After cleaning, grout can be sealed or colour-sealed to keep it looking new. Tell us the type of tile, the area in square metres if you know it, and photos of the worst areas. We will match you with a local specialist and send a clear price.

How it works

  1. Tell us about your tiles

    Use the quote form to tell us the type of tile, where it is, roughly how many square metres, and what the problem is, such as dirty grout, limescale or worn stone. Clear photos of the worst areas help us quote accurately.

  2. Receive a clear price

    We send a fixed price for cleaning and any sealing, colour sealing, regrouting or stone restoration. If the tile type is unclear, the specialist may test a small area first.

  3. Prepare the room

    Move furniture, rugs and loose items off the floor and out of the shower. Make sure there is water and power nearby and parking close by for the machine and equipment.

  4. Cleaning and treatment

    The specialist cleans with products matched to the tile, scrubs grout lines by machine or hand and extracts the dirty solution. Sealing or regrouting follows once surfaces are fully dry.

  5. Aftercare advice

    You get a walk-through of the finished surface and advice on drying times, how long to wait before mopping or showering, and which cleaning products to use so the sealer lasts.

Tile and Grout Cleaning prices

Tile and grout cleaning is usually priced per square metre for floors and per enclosure for showers, depending on the tile type, how dirty the grout is and whether sealing or colour sealing is added. Natural stone and Victorian tiles take more time and care. A minimum charge often applies to small jobs. We give a fixed price after seeing photos.

JobGuide priceNotes
Ceramic or porcelain floor deep clean£4–£8 per m²Machine clean, grout scrub and extraction; minimum charge usually around £120.
Shower enclosure clean£90–£160Limescale, soap scum and grout mould treated on walls, tray and screen.
Grout sealing£2–£4 per m²Impregnating sealer applied after cleaning to slow future staining.
Grout colour sealing£8–£15 per m²Uniform colour coating for stained or patchy grout, in a choice of shades.
Natural stone clean and seal£10–£25 per m²Stone-safe cleaning, honing where needed and impregnating sealer.
Victorian hallway tile restorationfrom £350Stripping old coatings, deep cleaning and breathable sealing of a typical hallway.

What affects the price →

Who we work for

Homeowners

Kitchen floors, hallways, bathrooms and showers are the most common jobs. A deep clean and seal can make tired tiles look almost new for a fraction of the cost and disruption of retiling.

Owners of period homes

Original Victorian and Edwardian hallway tiles are a valued feature. Careful restoration removes decades of dirt and old coatings without damaging the tiles, and a breathable sealer protects them.

Landlords and letting agents

Stained grout and mouldy showers are common causes of end-of-tenancy disputes and poor viewings. Professional cleaning and resealing between tenancies keeps properties presentable and protects your investment.

Restaurants and commercial kitchens

Greasy grout in commercial kitchens is a hygiene and slip risk. Specialists can deep clean outside opening hours, using degreasers and extraction to remove built-up fat from tiles and joints.

Gyms, pools and leisure facilities

Changing rooms and shower areas face constant water, body products and foot traffic. Regular deep cleaning tackles limescale, soap residue and mould to keep them hygienic and pleasant.

Rules and standards that apply

  • The Control of Substances Hazardous to Health Regulations 2002 (COSHH) require cleaning businesses to assess and control the risks from the acidic and alkaline chemicals used in tile and grout cleaning.
  • For commercial floors, the HSE recommends the pendulum test to measure slip resistance, with a Pendulum Test Value of 36 or above indicating low slip potential, so cleaning and sealing products should not leave a slippery film.

How to choose the right tile and grout cleaning company

  • Ask how they identify your tile and stone type, and which products they will avoid on it.
  • Check they use extraction or a wet vacuum to remove dirty solution, not just a mop.
  • Ask what sealer they use and whether it is breathable for period or natural stone floors.
  • Make sure they have public liability insurance in case a tile is damaged during cleaning.
  • Ask to see before and after photos of similar tiles they have cleaned, especially for natural stone.
  • Confirm drying times and when you can walk on, mop or use the shower afterwards.

Frequently asked questions

How much does professional tile and grout cleaning cost?

Professional tile and grout cleaning in the UK typically costs £4 to £8 per square metre for ceramic or porcelain floors, with a minimum charge of around £120. Shower enclosures usually cost £90 to £160. Grout colour sealing is about £8 to £15 per square metre, and natural stone cleaning and sealing £10 to £25 per square metre.

Can dirty grout be cleaned or does it need replacing?

Most dirty grout can be cleaned rather than replaced. A professional deep clean with alkaline cleaner, scrubbing and extraction removes the majority of embedded dirt. If grout is permanently stained, colour sealing gives a uniform finish. Only cracked, crumbling or missing grout needs raking out and replacing.

Why does my grout keep going black?

Grout goes black because it is porous and absorbs dirty mop water, grease and soap residue, and in damp areas mould grows in it. Using too much floor cleaner, not rinsing it off and poor ventilation in bathrooms all make it worse. Sealing grout after cleaning slows the process considerably.

Does steam cleaning work on grout?

Steam cleaning can loosen surface dirt on grout, but on its own it rarely removes deeply embedded soil and can push dirty moisture further into unsealed grout. It also risks damaging some sealers and natural stone. Professional cleaning combines chemical dwell time, scrubbing and extraction, which lifts dirt out of the grout.

What is grout colour sealing?

Grout colour sealing is a coating brushed into grout lines after cleaning that bonds to the grout, covers stains and seals it at the same time. It gives a uniform colour across the floor or wall and comes in a range of shades. It is a practical alternative to regrouting where grout is sound but permanently discoloured.

How often should grout be sealed?

Grout in busy floors and showers usually benefits from resealing every one to three years, depending on traffic, cleaning products and the sealer used. A simple test is to drip water on the grout: if it darkens and soaks in quickly, the sealer has worn off. Colour sealed grout generally lasts longer.

Can I use vinegar on tiles?

Vinegar can be used occasionally on glazed ceramic and porcelain tiles, but it should never be used on natural stone such as marble, limestone or travertine, because the acid etches the surface. Regular use of vinegar can also degrade cement-based grout over time. A pH-neutral tile cleaner is safer for routine cleaning.

How long does tile and grout cleaning take?

A typical kitchen or hallway floor of 10 to 20 square metres takes two to three hours to clean, plus drying time. A shower enclosure takes one and a half to two and a half hours. Sealing adds time and needs dry grout, and natural stone or Victorian tile restoration can take a full day or more.

See all FAQs →

Get a free tile and grout cleaning quote

Tell us what you need and we'll come back with a clear price.

Request a quote